Publications

Journal Articles

[2017]

1. B.J. Wisner and A. Kontsos*, “Particle Fracture as a Damage Precursor in Aluminum Alloys”, Fatigue & Fracture of Engineering Material Systems (Accepted)
2. C. Mo, and A. Kontsos*, “Twinning Contribution to Strain Localizations During Cyclic Loading of Magnesium Alloys”, Submitted to Fatigue and Fracture of Engineering Materials& Structures
4. B.J. Wisner and A. Kontsos*, “The Role of Particles in Fatigue of Aluminum Alloys”, Submitted to International Journal of Fatigue
5. M. Matthew, Α. Ellenberg, S. Esola, M. McCarthy, I. Bartoli and A. Kontsos*, “Multiscale Deformation Measurements using Multispectral Sensing”, Submitted to Structural Control and Health Monitoring
6. D. Liu, B. Shakibajahromi, D. E. Breen, G. Dion and A. Kontsos*, “Physics-based Reduced Order Modeling of Knitted Textile Behavior”, Submitted to ASME Journal of Applied Mechanics
7.F. Wang, K. Hazeli, K.D. Molodov, C.D. Barrett, T. Al-Samman, D.A. Molodov, A. Kontsos, K.T. Ramesh, H. El Kadiri, S.R.Agnew, “Characteristic dislocation substructure in {101¯2} twins in hexagonal metals”, Scripta Materialia, Vol. 143, pp. 81-85  (View)
8. K.P. Baxevanakis, C. Mo, M. Cabal and A. Kontsos*, “An Integrated Method to Model Strain Localization Bands in Magnesium Alloys”, Computational Mechanics Journal (View)
9. S. Esola, I. Bartoli, S.E. Horner, J.Q. Zheng and A. Kontsos*, “Defect detection via instrumented impact in thick-sectioned laminate composites”, Journal of Nondestructive Evaluation, Vol. 36, Article 47 (View)
10. D. Liu, D. Christe, B. Shakibajahromi, C. Knittel, N. Castaneda, D. E. Breen, G. Dion and A. Kontsos*, “On the Role of Material Architecture in the Mechanical Behavior of Knitted Textiles”, International Journal of Solids and Structures, Vol. 109, pp. 101-11 (View)
11. M. Bolhassani, P.A. Vanniamparambil, S. Rajaram, A.A. Hamid*, A. Kontsos  and I. Bartoli, “Failure Analysis and Damage Detection of Partially-Grouted Reinforced Concrete Masonry Walls by Enhancing Deformation Measurement Using DIC“, Journal of Engineering Structures, Vol. 134, pp. 262-275 (View)
12. N. Castaneda, B.J. Wisner, J.A. Cuadra, S. Amini and A. Kontsos*, “Investigation of the Z-binder Role in Progressive Damage of 3D Woven Composites”, Composites Part A, Vol. 98, pp. 76-89 (View)
13. S. Rajaram, P.A. Vanniamparambil, F. Khan, M. Bolhassani, A. Koutras, I. Bartoli, F. Moon, A. Hamid, P. Benson Shing, J. Tyson and A. Kontsos*, “Full-Field Deformation Measurements During Seismic Loading of Masonry Buildings”, Structural Control & Health Monitoring, Vol. 24 (4), pp. e1903  (View)

[2016]

1. Α. Ellenberg, A. Kontsos, F. Moon and I. Bartoli*, “Bridge Deck Delamination Identification from Unmanned Aerial Vehicle Infrared Imagery“, Automation in Construction, Vol. 72, pp. 155-165 (View)
2. C. Mo, B. Wisner, M. Cabal, K. Hazeli, K.T. Ramesh, H. El Kadiri, T. Al-Samman, K.D. Molodov, D. A. Molodov and A. Kontsos*, “Acoustic Emission of Deformation Twinning in Magnesium”, Materials, Vol. 9, 662 (View)
3. J. A. Cuadra, K. P. Baxevanakis, M. Mazzotti I. Bartoli and A. Kontsos*, “Energy Dissipation via Acoustic Emission in Ductile Crack Initiation“, International Journal of Fracture, Vol. 199(1), pp. 89-104 (View)
4. J. A. Cuadra, K. P. Baxevanakis, A. Loghin and A. Kontsos*, “Validation of a Cyclic Plasticity Computational Method Using Fatigue Full Field Deformation Measurements“, Fatigue and Fracture of Engineering Materials & Structures, Vol 39(6), pp. 722-736 (View)
5. Α. Ellenberg, I. Bartoli, F. Moon and  A. Kontsos*, “Bridge Related Damage Quantification using Aerial Vehicle Imagery“, Structural Control and Health Monitoring, Vol. 23, pp. 1168-1179 (View)
6. S. Rajaram, J. Cuadra, R. Saralaya, I. Bartoli and A. Kontsos*, “In situ CTE Measurements and Damage Detection Using Optical Metrology”, Measurement Science & Technology, Vol. 27, 025202 (View)

[2015]

1. B.J. Wisner, M. Cabal, P.A. Vanniamparambil, J. Hochhalter, W.P. Leser and A. Kontsos, “In situ Microscopic Investigation to Validate Acoustic Emission Monitoring”, Experimental Mechanics, Vol. 55, pp. 1705-1715 (View)
2. A. Ellenberg, L. Branco, A. Krick, I. Bartoli and A. Kontsos, “Use of unmanned aerial vehicle for quantitative infrastructure evaluation”, Journal of Infrastructure Systems, Vol. 21, pp. 04014054 (View)
3. A. Watters, J. Cuadra, A. Kontsos and G. Palmese, “Processing-Structure-Property relationships of SWNT-Epoxy composites prepared using ionic liquids”, Composites: Part A, Vol. 73, pp. 269-276 (View)
4. P.A. Vanniamparambil, R. Carmi, F. Khan, J. Cuadra, I. Bartoli and A. Kontsos, “An active-passive acoustics approach for bond-line condition monitoring in aerospace skin stiffener panels”, Journal of Aerospace Science and Technology, Vol. 43, pp. 289-300 (View)
5. F. Khan, M. Bolhassani, A. Kontsos, A. Hamid, I. Bartoli. “Modeling and Experimental Implementation of Infrared Thermography on Concrete Masonry Structures”, Infared Physics and Technology, Vol. 69, pp. 228-237 (View)
6. P.A. Vanniamparambil, U. Guclu, and A. Kontsos, “The identification of crack initiation using advanced acoustic emission analysis”, Experimental Mechanics, Vol. 55, pp. 837-850 (View)
7. K. Hazeli, H. Askari, J. Cuadra, F. Streller, R.W. Carpick, H.M. Zbib and A. Kontsos, “Microstructure-sensitive investigation of Magnesium alloy fatigue”, International Journal of Plasticity, Vol. 68, pp. 55-76 (View)
8. K. Hazeli, J. Cuadra, F. Streller, C. Bahr, M. L. Taheri, R. W. Carpick and A. Kontsos, “Three-dimensional effects of twinning in Magnesium Alloys”, Scripta Materialia, Vol. 100, pp. 9-12 (View)
9. J. Cuadra, P.A. Vanniamparambil, D. Servansky, I. Bartoli and A. Kontsos, “Acoustic Emission source modeling using a data-driven approach”, Journal of Sound and Vibration, Vol. 341, pp. 222-236 (View)
10. F. Khan, S. Rajaram, P.A. Vanniamparambil, M. Bolhassani, A. Hamid, A. Kontsos and I. Bartoli, “Multi-sensing NDT for damage assessment of concrete masonry walls”, Structural Control and Health Monitoring, Vol. 22, pp. 449-462 (View)

[2014]

1. P.A. Vanniamparambil, M. Bolhassani, R. Carmi, F. Khan, I. Bartoli, F. L Moon, A. Hamid and A. Kontsos, “A data fusion approach for progressive damage quantification in reinforced concrete masonry walls”, Smart Materials and Structures, Vol. 23, pp. 015007 (View)
2. K. Hazeli, Α. Sadeghi, M.O. Pekguleryuz and A. Kontsos, “Damping and Dynamic Recovery in Magnesium Alloys Containing Strontium”, Materials Science and Engineering A, Vol. 589, pp. 275-279 (View)

[2013]

1. K. Hazeli, A. Sadeghi, M.O.Pekguleryuz and A. Kontsos, “The effect of Strontium in Plasticity of Novel Magnesium Alloys”, Materials Science and Engineering A, Vol. 578, pp. 383-393 (View)
2.  J. Cuadra, P.A. Vanniamparambil, K. Hazeli, I. Bartoli and A. Kontsos, “Damage Quantification in Polymer Composites using a Hybrid NDT Approach”, Composites Science and Technology, Vol. 83, pp. 11-21 (View)
3.  P.A. Vanniamparambil, F. Khan, K. Hazeli, J. Cuadra, E. Schwartz, A. Kontsos and I. Bartoli, “Novel Optico-Acoustic NDT for Wire Breaks Detection in Cables”, Structural Control and Health Monitoring, Vol. 20, pp. 1339-1350 (View)
4.  K. Hazeli, J. Cuadra, P.A. Vanniamparambil and A. Kontsos, “In situ Identification of Twin-related Bands near Yielding in a Magnesium Alloy”, Scripta Materialia, Vol. 68, pp. 83-86 (View)

[2012]

1. I. Neitzel, V. Mochalin, J. Niu, J. Cuadra, A. Kontsos, G. Palmese, Y. Gogotsi, “Maximizing Young’s modulus of aminated nanodiamond-epoxy composites measured in compression”, Polymer, Vol. 53, pp. 5965-5971 (View)
2. P.A. Vanniamparambil, I. Bartoli, K. Hazeli, J. Cuadra, E. Schwartz, R. Saralaya and A. Kontsos, “An integrated SHM approach for crack growth monitoring”, Journal of Intelligent Material Systems & Structures, Vol. 23(14), pp. 1563-1573 (View)
3. Q. Zhang, V. Mochalin, I. Neitzel, K. Hazeli, J. Niu, A. Kontsos, J. Zhou, P.I. Lelkes, and Y. Gogotsi, “Mechanical properties and biomineralization of multifunctional nanodiamond-PLLA for bone tissue engineering”, Biomaterials, Vol. 33, pp. 5067-5075 (View)

[2011]

1. Α. Kontsos, T. Loutas, V. Kostopoulos, K. Hazeli, B. Anasori and M. Barsoum. “Nanocrystalline Mg-MAX composites: Mechanical Behavior Characterization via Acoustic Emission Monitoring”, Acta Materialia, Vol. 59, pp.5716-5727 (View)

Book Chapters

1. A. Kontsos and J.A. Cuadra, “Multiscale Stochastic Finite Elements Modeling of Polymer Nanocomposites”, V. Mittal (Ed.): Modeling and Prediction of Polymer Nanocomposite Properties, Vol. 4, Wiley VCH Germany (Polymer Nano-, Micro- and Macro-composites Series) (View)

Conference Proceedings

[2017]

1. F. Wang, K. Hazeli, K.D. Molodov, C.D. Barrett, T. Al-Samman, D.A. Molodov, A. Kontsos, K.T. Ramesh, H. El Kadiri, S.R.Agnew, “Characteristic dislocation substructure in {101¯2} twins in hexagonal metals”, Scripta Materialia, Vol. 143, pp. 81-85
2. R. Vallet, C. Knittel, D. Christie, N.A. Castaneda, C. A. Kara, K. Mazur, D. Liu, A. Kontsos, Y. Kim, G. Dion, “Digital fabrication of textiles: an analysis of electrical networks in 3D knitted functional fabrics”, Proc. SPIE 10194, Micro- and Nanotechnology Sensors, Systems, and Applications IX, 1019406 (May 18, 2017); doi:10.1117/12.2263515
B.J. Wisner and A.Kontsos*, “Fatigue Damage Precursor Identification Using Nondestructive Evaluation coupled with Electron Microscopy”, In: Zehnder A. et al. (eds) 6 Fracture, Fatigue, Failure and Damage Evolution, Volume 8. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Vol. 8, pp. 1-8

[2016]

A.Ellenberg, A. Kontsos and I. Bartoli, “Unmanned Aerial Vehicle for Infrastructure Evaluation”, ASNT Fall Meeting, Long Beach CA, October 2016
N.A. Castaneda, B. Wisner, J. Cuadra and A. Kontsos*, “Identification of 4D Damage Precursors in 3D Woven Composites”, 31st American Society of Composites Conference and ASTM D30 Meeting 2016, Williamsburg VA, September 2016
A. Ellenberg, A. Kontsos, F. Moon and I. Bartoli, “Rapid, Preliminary Bridge Deck Damage Identification from Unmanned Aerial System Imagery”, NDE/NDT for Highways and Bridges: SMT 2016, Portland OR, August 2016
1. D. Christe, B. Wisner, J. Bhatt and A. Kontsos, “Raising Interest in STEM Education: A Research-based Community College-University Partnerships for Improving Minority Participation”. American Society for Engineering Education. New Orleans, LA, June 2016.
R. Carmi, A. Bussiba, R. Shneck and A. Kontsos*. “Damage Onset and Accumulation in fiber reinforced metal laminate under quasi-static and fatigue loading monitored nuAcoustic Emission method”, Acoustic Emission Working Group 58, Drexel University, Philadelphia PA, May 2016
B.J. Wisner, C. Mo, R. Whitmore, S. Rajaram and A.Kontsos*, “Damage Precursor Identification in Metal Alloys using Acoustic Emission Monitoring coupled with Microscopy”, Acoustic Emission Working Group 58, Drexel University, Philadelphia PA, May 2016
A. Ellenberg, A. Kontsos, F. Moon and I. Bartoli, “Low-Cost, Quantitative Assessment of Highway Bridges through the Use of Unmanned Aerial Vehicles”, SPIE 2016 Meeting in Las Vegas, Nevada, March 2016

[2015] 

1. F. Khan, A. Ellenberg, M. Mazzotti, I. Bartoli, A. Kontsos, F. Moon and A. Pradhan, “Investigation on Bridge Assessment Using Unmanned Aerial Systems”. In ASCE Structures Congress 2015.
2. S. Esola, I. Bartoli, S.E. Horner, J.Q. Zheng and A. Kontsos. “Quantitative Acoustics Approach For Damage Detection In Hard Armor Protective Inserts. American Society for Composites 30th Technical Conference”. September 28-30, 2015. Michigan State University, East Lansing, Michigan
3. A. Kontsos, U. Guclu, P.A. Vanniamparambil, S. Esola and S. Rajaram. “Remaining Useful Life Estimations Using Acoustic Emission”. September 1-3, 2015. Stanford University, Stanford, CA.
4. D. Christe, J. Bhatt, A. Shah, L. Powell and A. Kontsos. “Raising Interest in STEM Education: A Research-based Learning Framework for Improving Minority Participation”. American Society for Engineering Education (ASEE) 122nd Annual Conference & Exposition. June 14-17, 2015. Seattle, WA.
5. B. Wisner, M. Cabal, P.A. Vanniamparambil, J. Hochhalter and A. Kontsos. “Microstructure-Sensitive Investigation of Fracture using Acoustic Emission Coupled with Electron Microscopy”. SAMPE 2015. May 2015. Baltimore, MD.
5. D. Christe, J. Bhatt, A. Shah, L. Powell, & A. Kontsos. “Raising Interest in STEM Education: A Research-based Learning Framework“, 4th Annual IEEE Symposium on Emerging Trends in Library & Information Science, January 9 2015, Delhi, India

[2014]

1. J. Cuadra, K. Hazeli, M. Cabal, and A. Kontsos, “The role of multiple strain localizations in Fatigue of Magnesium alloys”, ASME IMECE 2014, Montreal, Canada, November 2014
2. F. Khan, A. Ellenberg, S. Ye, A.E. Aktan, F. Moon, A. Kontsos, A. Pradhan and I. Bartoli, “Multispectral Aerial Imaging for Infrastructure Evaluation”, ASNT 2014, Charleston, South Carolina, October 2014
3. S. Esola, A. Kontsos, I. Bartoli, S.E. Horner & J.Q. Zheng, “Defect Morphology And The Feasibility Of Non- Destructive Damage Detection In Hard Armor Protective Inserts By Vibro-acoustics”, PASS 2014, Cambridge, UK, September 2014
4. R. Carmi, A. Bussiba, I. Alon, P.A. Vanniamparambil, J. Cuadra, U. Guclu and A. Kontsos, “Acoustic Emission as a tool for monitoring fatigue damage accumulation in fiber reinforced metal laminates”, ACS 2014 Conference, San Diego, California, September 2014
5. S. Rajaram, P.A. Vanniamparambil, J. Cuadra, A. Ramadurgakar, I. Bartoli and A. Kontsos, “A multispectral nondestructive approach for image-based damage monitoring”, ACS 2014 Conference, San Diego, California, September 2014
6. P.A. Vanniamparambil, R. Carmi, F. Khan, I. Bartoli and A. Kontsos, “Identification of debonding in CFRP stiffened panels using pattern recognition”, ACS 2014 Conference, San Diego, California, September 2014
7. B. Cohen, S. Ye, G. Karaman, F. Khan, I. Bartoli, A. Pradhan, A. Ellenberg, F. Moon, P. Gurian, A. Kontsos, E. Minaie, C. Young, D. Lowdermilk and E. Aktan, “Design and implementation of an integrated operations and performance preservation monitoring system for asset management of major bridges”, 7th European Workshop on Structural Health Monitoring, Nantes, France, July 2014
8. S. Esola, I. Bartoli, S.E. Horner, J.Q. Zheng & A. Kontsos, “Parametric Study Using Modal Analysis of a Bi-Material Plate With Defects”, 41st Annual Review of Progress in Quantitative Nondestructive Evaluation, Boise, Idaho, July 2014
9. P.A. Vanniamparambil, J. Cuadra, U. Guclu, I. Bartoli and A. Kontsos, “Cross-validated detection of crack initiation in aerospace materials“, SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring Conference, San Diego, California, March 2014
10. F. Khan, I. Bartoli, P.A. Vanniamparambil, A. Kontsos, M. Bolhassani, A. Hamid, “Acoustics and temperature based NDT for damage assessment of concrete masonry system subjected to cyclic loading“, SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring Conference, San Diego, California, March 2014
11. J. Cuadra, P.A. Vanniamparambil, K. Hazeli, I. Bartoli and A. Kontsos, “Data-fusion NDE for Progressive Damage Quantification in Composites“, Proceedings of the Advanced Composites for Aerospace, Marine and Land Applications in TMS 2014, San Diego (CA), February 2014
12. Κ. Hazeli, J. Cuadra, P.A. Vanniamparambil, R. Carmi and A. Kontsos, “Quantification of Microstructure-Properties-Behavior Relations in Magnesium Alloys Using a Hybrid Approach“, Proceedings of the Mg 2014 symposium in TMS 2014, San Diego (CA), February 2014

[2013]

1. R. Carmi, P.A. Vanniamparambil, J. Cuadra, K. Hazeli, U. Guclu, A. Bussiba, I. Bartoli and A. Kontsos,  “Acoustic Emission and Digital Image Correlation as Complementary Techniques for Laboratory and Field  Research”, World Conference in Acoustic Emission 2013, Shanghai, China, November  2013
2. P.A. Vanniamparambil, F. Khan, S. Rajaram, E. Schwartz, M. Bolhassani, A. Hamid, A. Kontsos and I. Bartoli, “Multiple Cross Validated Sensing System for Damage monitoring in Civil Structural Components”, 9th International Workshop on Structural Health Monitoring, Stanford Univ., September 2013
3. R. Carmi, P.A. Vanniamparambil, U. Guclu, J. Cuadra, I. Bartoli and A.Kontsos, “Multimodal Non-destructive Evaluation Approach for Damage Quantication”, 9th International Workshop on Structural Health Monitoring, Stanford Univ., September 2013
4. F. Khan, P.A. Vanniamparambil, R. Carmi, A.Kontsos and I. Bartoli, “Integrated Health Monitoring System for Damage Detection in Civil Structural Components”, ICOSSAR 2013, New York, NY, June 2013
5. P.A. Vanniamparambil, R. Carmi, F. Khan, I. Bartoli and A. Kontsos, “Novel Optico-Acoustic Sensing System for Cross-Validated Structural Health Monitoring”, ICOSSAR 2013, New York, NY, June 2013
6. P.A. Vanniamparambil, F. Khan, E. Schwartz, A. Kontsos, I. Bartoli, M. Bolhassani and A. Hamid “Using DIC to Measure Deformation Fields of Concrete Masonry Test Specimens”, 12th Canadian Masonry Symposium, Vancouver, Canada, June 2013
7. E. Schwartz, R. Saralaya, J. Cuadra, K. Hazeli, P.A. Vanniamparambil, R. Carmi, I. Bartoli and A. Kontsos, “The Use of Digital Image Correlation for Non-destructive and Multi-scale Damage Quantification”, SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring Conference, San Diego, California, March 2013
8. P.A. Vanniamparambil, F. Khan, R. Carmi, S. Rajaram, E. Schwartz, A. Kontsos and I. Bartoli, “Integrated Non-destructive Testing Approach for Damage Detection and Quantification in Structural Components”, SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring Conference, San Diego, California, March 2013

[2012]

1. K. Hazeli, Α. Sadeghi, M.O. Pekguleryuz and A. Kontsos, “Microstructure and Mechanical Behavior of Novel Extruded Magnesium Alloys”. 9th International Conference on Magnesium Alloys and their Applications, Vancouver, Canada, July 2012
2. I. Bartoli, Α. Emin Aktan, A. Kontsos, P.A. Vanniamparambil, K. Hazeli, “An Integrated Health Monitoring Approach for Damage Quantification in Critical Structural Components”. EACS 5th European Conference on Structural Control, Genoa, Italy, June 2012
3. H. Gong, Y. Kim, Q. Zhang, K. Hazeli, A. Kontsos, P. I. Leikes, D. Yao and J.G. Zhou, “Micro Characterization of Mg and Mg Alloy for Biodegradable Orthopedic Implants Application”. ASME International Manufacturing Science and Engineering Conference, Notre Dame, Indiana, June 2012
4. P.A. Vanniamparambil, I. Bartoli, K. Hazeli, R. Saralaya, J. Cuadra, E. Schwartz and A. Kontsos, “In-situ Acousto-ultrasonic Monitoring of crack propagation in Aluminum Alloy”. SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring Conference, San Diego, California, March 2012

[2010]

1. A. Kontsos, K. Hazeli, M.W. Barsoum, B. Anasori, Th. Loutas, G. Sotiriadis, V. Kostopoulos, “Grain Size Effect on the Fatigue Response of Nanocrystalline Magnesium Composites Reinforced with MAX Phases”. 9th HSTAM International Congress on Mechanics Limassol, Cyprus 2010.